1/32 scale Disney Nautilus Model Kit - DISCONTINUED!

Click on the photos above for larger images

Unavailable - Sorry...

Complete kit for the construction of a Museum quality replica of Captain Nemo's famous submarine from Disney's 1954 classic,
"20,000 Leagues Under the Sea"

Massive 1/32 scale (66.5" overall length!). Constructed from fiberglass with white metal and resin detail pieces. The newly redesigned and accurized model features:

  • Fully operational breather flaps
  • Retractable rear hatch
  • Movie-accurate propeller
  • Removeable skiff
  • Photo-etched deck grating and wheelhouse flooring
  • Completely upgraded wheelhouse with detailed interior
  • Movie-accurate raker arch
  • Completely redesigned upper deck
  • Ornate Victorian display stand

Hear what our customers are saying!:

"First off I was very impressed with the packaging and care taken to make sure it arrived safely.  The presentation of the model with the foam padding and other materials told me before I even got to see it that these guys really take pride in what they do.  When I finally got to see the model, I was awestruck.  Wow, this thing is big and, after glancing at all the materials, without a doubt the most demanding model project I have ever committed to.

I can’t wait.

What an outstanding casting!  I have worked with glass models before and always found a lot of bubbling and plenty of opportunities to re-sculpt and use a ton of epoxy putty to fix things.  Not here.  THE DETAIL IS AMAZING!  Kudos to Custom Replicas.  You guys really know what you’re doing.  And the rivet detail is in a category of its own.  Oustanding!!  I could spend hours just looking at it. 

The Wheelhouse:  What a work of art!  Yet another excellent casting with detail that never ends.   The operational vent panels, the staircase, etc. are just exceptional. I looked at the pieces for the wheelhouse interior detailing and it looks like much more is available here than in previous versions. I noticed that extra/repeat resin pieces for the wheelhouse interior are provided.  Good foresight on your part.  It is also nice to know that spare parts are available if needed."

 

OPTIONAL ACCESSORIES:

66" Nautilus Custom Lighting Kit: Custom designed by Randy Neubert specifically for this kit, the Nautilus Drydocks LED lighting kits make bringing this model to life easier than ever.

This new circuit board has been consolidated into one master controller with 4 new features. Channel 1 has 18 led ports, channel 2 has 6 led ports, channel 3 has 6 led ports also, each channel is dimmable and on/off switchable.
The new added feature is channel 4 is a DC motor control that is also speed adjustable and on/off switchable. This makes the availability to incorporate the moving propeller effect into the model. The whole system can support max 30 leds & 1 mini DC motor, the kit comes with everything you will need to light the model, “DC motor not included”

PARTS INCLUDED:
1- 4-Channel Dimmer Board Master Controller/ 30 Resistors
1- 9 Volt Regulated DC Wall Power Supply
1- DC Power Plug Jack
1- Main On/ Off Slide Switch
1- 24-Misc. Leds White / Green
1- 24 Gage Hook up Wire
1- Misc. Shrink Tubing
1- Full Instructions

$180 USD Plus Shipping

Not sure if you're ready to tackle building up the board? Take a look at a quick video I did up to show you how its done!:

 

 

International Customers please CLICK HERE!

 

66" Nautilus WTC for Remote Control Conversion: NOW AVAILABLE! The Nautilus Drydocks is proud to announce the availability of custom manufactured OTW Dive Modules for the 66" Nautilus kits! These Dive Modules have the following features:

  • Completely enclosed in a watertight plexiglass cylinder.

  • Completely assembled!

  • All you need to supply are a radio receiver (FM, NOT PCM) and three servos along with your Sealed Lead Acid battery rated at 12V.

Each Dive Module comes with the following:

  1. Drive motor complete with motor mounts and waterproof shaft housings for the propeller shaft.

  2. A speed controller rated up to 30 amps.

  3. A BEC, which allows you to run the whole system AND the radio off a 12V battery.

  4. A pitch controller, which keeps your submarine straight and level underwater.

  5. Reversible water pump and hydraulic valve.

  6. Electronic pump management system that is complete with two failsafe modes.

  7. Three ballast tank probes.

  8. Three stainless steel pushrods and clevises.

  9. Three waterproof silicone rubber bellows for the control rods.

  10. Two waterproof external battery connectors, one positive and one negative.

  11. A set of three baffles in the ballast tank.

The electronic components are mounted on two easily removable trays.
All internal connectors are of the Tamiya type.

These modules are custom built on an as-ordered basis at the OTW facility in the UK. Please allow 6 to 8 weeks delivery time.

930 British Pounds Sterling Includes Shipping to the Domestic US!
For up to the minute currency conversions, check out www.xe.com!
To order, please Email Me for an invoice. Be sure to include your shipping address.

 

 

Movie-accurate Propellers in Aluminum : Now Available! For the R/C crowd, a beautiful aluminum propeller is now available to drive your Nautilus into the depths! Not only are they fully functiona, but they look amazing as well! Not interested in making your model remote controlled? These props are a beautiful addition to a static display model as well!

These are rough castings and will require clean up and polishing for a shiny finish. Prop hubs are not pre-drilled and will need to be drilled and tapped for mounting on a drive shaft.

PLEASE NOTE: Brass propellers are SOLD OUT! Please disregard the selection box in your ordering window. All orders will be shipped in ALUMINUM!

$65 USD Each Plus Shipping

Metal
 

 

 

 

 
 
All images and content are copyright © of the Nautilus Drydocks 2009